Ingredients: Cone-shaped Styrofoam form for the tree
Smaller cylinder piece for the base.
Pretzels used: Snyder’s of Hanover, Pretzel Sticks, Mini Pretzels, Snaps and Rods.
Vanilla Frosting
Red & Green candies


Instructions: Break Pretzel Rods to size and glue them around the base.
Take Pretzel Snaps and create an edge around the top of the cylinder by gluing around the top but allowing a little of the Snap over the top.
Stick a Rod into the center of the top of the cylinder for trunk of the tree. Next, place the cone-shaped Styrofoam piece on the top of the Rod, gently pushing down until the cone is stable.

Start at the bottom of the cone, push a row of Sticks on an angle into the cone. When that row is finished, repeat the next row about 1” above the first row. repeat until you reach the top. Adhere a Mini Pretzel “star” on top using vanilla frosting.
The garland is piped vanilla frosting and the tree ornaments are red and green candies - hold the candies in place with a drop of frosting.
place bits of dried decorators moss on the top of the cylinder.